Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across East Point
Furnace repair in East Point typically runs $150 – $700, and most jobs are finished the same day we arrive. The older homes here have their own personality: brick ranches on slabs, Craftsman bungalows on pier-and-beam, and the occasional gravity-fed floor furnace still doing its best from the 1940s. We know the difference, and it changes how we diagnose a no-heat call. If your furnace is down in East Point, call (478) 223-8776. A live person answers, any hour, every day.
Why Cold Harbour Heating and Air Atlanta Is East Point’s Preferred Furnace Repair Company
Cold Harbour Heating and Air has served East Point since 2003, and we’ve spent that time inside crawlspaces under houses on Jefferson Avenue, in attics above Conley Hills bungalows, and standing in front of furnaces off Winburn Drive. Homeowners here have dealt with enough HVAC companies that overpromise and underdeliver. So we put our work in writing before a single tool comes out. Every repair comes with the 365-Day Done Right Promise: if a repair fails inside a full year, we return and correct it at no charge. No verbal assurances. On paper.
Mr. Victor Mancini leads our team, and he knows East Point’s housing stock the way a doctor knows a recurring condition. That matters because the right repair on a 1928 Craftsman is not the same repair as on a 2015 infill rebuild. When you call Cold Harbour, the technician who arrives is background-checked, uniformed, and trained on nine major residential HVAC brands, including Carrier, Trane, Bryant, and American Standard. You know who’s walking through the door. And the written price in your hand before work begins is the price you pay, not a negotiation starter.
Styles & brands we work with
Heating Repair in East Point
Heating Repair in East Point often means more than swapping a failed part. Many of the homes here were built between the 1920s and 1960s, and their heating systems carry the quirks of that era: undersized ductwork, disconnected return-air paths, and furnaces oversized for rooms that were never meant to be centrally heated. A heating repair call in East Point typically runs $150 – $700 depending on what failed and how accessible the unit is. We diagnose the system as a whole, not just the symptom.
Ignitor and Gas Valve Work
A furnace that clicks but won’t light usually has a failing hot-surface ignitor or a gas valve that has lost its signal. Ignitor replacements in East Point commonly run $150 – $280 parts and labor included. Gas valve repairs or replacement fall in the $250 – $500 range. These are straightforward fixes, but on older systems we always check the heat exchanger before calling the job done. A glowing ignitor doesn’t mean a safe furnace.
Blower Motor and Airflow Corrections
When a blower motor seizes or a run capacitor fails, the furnace may overheat and shut off, or simply never push warm air to the far bedrooms. Blower motor replacement in East Point runs $150 – $650. On older homes, we often find the real problem is not the motor but the return-air path: a return grille stuck behind furniture, a disconnected duct run, or a crawlspace return pulling in damp outside air. Fixing airflow is as important as fixing the part.
Boiler Repair in East Point
Boiler Repair in East Point is a specialized call, and we treat it that way. The radiators and baseboard systems in the city’s older brick homes were often installed with care and can run reliably for decades, but valves stick, circulator pumps wear out, and expansion tanks fill with sediment. A boiler repair here typically runs $150 – $700. The work requires patience and exact part matching, and we carry common boiler control and pump parts on the truck so East Point customers are not waiting days for a fix.
Circulator Pump and Zone Valve Service
When one part of the house stays cold while the rest feels fine, a failed zone valve or a weak circulator pump is almost always the culprit. Replacing a circulator pump in East Point generally lands between $300 and $600 depending on the boiler’s age and how tight the mechanical room is. We also bleed air from baseboard loops, because trapped air mimics a pump failure and is a simple fix most homeowners never suspect.
Expansion Tank and Pressure Problems
A waterlogged expansion tank is one of the most common boiler faults we see in East Point’s older homes. The boiler pressure spikes, the relief valve drips, and the system short-cycles. Expansion tank replacement runs $200 – $400 in most East Point homes. We replace the tank, reset system pressure, and check that the pressure-reducing fill valve is still holding steady. It is a repair that prevents a much larger failure later in the season.
Trusted Brands We Service in East Point
Our technicians work on Carrier, Trane, Bryant, American Standard, and five other major residential brands. In East Point, that matters because the housing stock is so varied: we see 1980s Trane units in ranches off Washington Road, newer American Standard systems in infill homes near the Camp Creek corridor, and Carrier furnaces in the mid-century brick neighborhoods around Delowe Drive. We stock common parts for these brands locally, so many repairs in East Point are completed the same visit. No “we’ll order it” limbo.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in East Point Homes
- Gravity floor furnaces abandoned in place. Many East Point homes still have an original gravity furnace under a hallway grate. When a modern furnace is added, the old gravity duct runs are sometimes left disconnected. The new furnace starves for return air and cycles on the limit switch. That is a repair we see often in Conley Hills and Jefferson Park.
- Undersized electrical panels from the 1950s and 1960s. A modern furnace’s blower motor draws more amperage than the original panel was designed for. The result: a breaker trips on the coldest night of the year. We identify the amperage draw, and where a new dedicated circuit is needed, we coordinate with a licensed electrician before the furnace work proceeds.
- Asbestos-wrapped ducts left unsealed in crawlspaces. Homes built before the 1980s in East Point often have ductwork wrapped in asbestos-containing material. It is rarely disturbed; it is almost always leaky. The furnace runs continuously but heat never reaches far bedrooms. We seal accessible joints and correct return-air sizing without disturbing the wrap.
- Single-zone systems fighting an unbalanced floor plan. Many East Point homes were built with one central return in a hallway. The furnace is the right size for the square footage, but the back bedrooms sit 12 degrees colder. Fixing this may mean adding a return-air plenum, reinforcing the blower speed, or zoning the system with dampers. We find the simplest fix that actually works.
Pricing for Furnace Repair in East Point, GA
Furnace repair in East Point typically runs $150 – $700. Smaller repairs like ignitor replacement or a flame sensor cleaning fall on the lower end. Larger jobs like a blower motor replacement or gas valve replacement run higher. Here are the line items we quote most often for East Point homes:
| Service | Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Boiler Repair | $150 – $700 |
| Blower Motor Replacement | $150 – $650 |
| Thermostat Calibration | $80 – $200 |
Every estimate is written before work begins. The price on the page is the price at your door, not a starting point for a upsell conversation. Call (478) 223-8776 for a free estimate on furnace repair in East Point, and we will tell you exactly what is wrong, exactly what it costs, and exactly when we will be there.
In East Point’s older neighborhoods like Conley Hills and Jefferson Park, many homes still rely on original gravity-fed floor furnaces. When one fails or is finally retired, the upgrade path is rarely as simple as swapping in a high-efficiency furnace. The original gravity system pulled air through floor grates and returned it by natural convection. Modern forced-air furnaces need a dedicated return-air path. That often means carving a hallway closet into a return-air plenum and running ductwork through a crawlspace with only 18 inches of clearance. We do this work regularly in East Point, and it is not a job a general handyman should touch. It takes understanding of static pressure, duct sealing, and the structural limits of the existing framing.
We recently repaired a 1962 brick ranch in Conley Hills where the furnace’s blower motor had seized and the original asbestos-wrapped ducts were leaking badly. Our tech replaced the blower motor, sealed the accessible duct joints, and added a proper return-air plenum in a hallway closet to balance static pressure across the house. The difference in even heat delivery was measurable within the first night. That is the kind of repair we do in East Point: not just the part that failed, but the underlying airflow problem that caused it to work harder than it ever should have.
We Also Serve Cities Near East Point
Our Furnace Repair team handles calls throughout the south metro. If you’re in Atlanta, Smyrna, Redan, or North Druid Hills, we cover those areas as well. Our scheduling is coordinated from the Atlanta office, and crews dispatch locally to East Point every day.
Serving East Point, GA - Our Local Coverage Area
We’re based in the East Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in East Point
Almost always, the furnace is fighting a return-air deficiency. East Point bungalows from the 1920s – 1940s were often built with one central return in the hallway, and the furnace cannot pull enough air back through the system to push heat to the far bedrooms. The fix is usually a return-air plenum addition in a hallway closet, or sealing crawlspace duct leaks. Call (478) 223-8776 and we’ll map the airflow before touching any parts.
Yes, and we do it regularly. The old floor furnace sits in a floor cavity; the replacement unit is installed elsewhere, often in an attic or a utility closet. The floor grate is capped from below with framing and a solid panel, and your hardwood around the opening remains untouched. The conversion involves new ductwork, a dedicated return path, and often an electrical panel upgrade. We handle the HVAC side and coordinate the electrical work with a licensed electrician. Call for a site visit; we will show you exactly where the new system would go before anything is removed.
It is a problem that can be managed. The wrap itself should not be disturbed except by a licensed abatement contractor, and we never cut into it. But the ductwork underneath is almost always leaky at the joints, which means your new furnace would push heated air into the crawlspace instead of the bedrooms. We seal accessible joints and add a proper return-air path without disturbing the wrap. We’ll flag any areas that need abatement before we start, so there are no surprises mid-job.
Your furnace’s blower motor is drawing more amperage than the electrical panel was designed to deliver. Many East Point homes built in the 1950s and 1960s still have original 60- or 100-amp panels, and a modern furnace blower can trip a 15-amp circuit when it starts under load on a cold morning. The repair may be as simple as replacing a failing run capacitor, or it may require a dedicated circuit. We diagnose the draw with a meter and tell you the exact fix before any work is approved.
That depends on the boiler’s age, the condition of the radiators, and what you want your cooling to look like. A boiler in good shape with sound radiators can run for decades with basic repairs, and a repair under $700 is usually money well spent. But if you are tired of window units for summer cooling, or the boiler is nearing 25 years old with a cracked heat exchanger, a ducted heat pump or mini-split system may be the better long-term move. We will walk you through the numbers for your specific home, not a generic sales pitch. Call (478) 223-8776 for an honest assessment.
When your furnace quits in East Point, do not guess at the cause. Call (478) 223-8776. A live person answers, and we will give you a firm arrival window, a written price, and a repair guaranteed in writing for 365 days. That is the Kingswell Way, and Victor Mancini’s team at Cold Harbour Heating and Air has operated by it in East Point since 2003. A cold harbour was a roadside shelter where travelers waited out the weather. Consider us the same.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air Atlanta, serving East Point since 2003.