Rheem AC Installation Nationwide

Rheem AC Installation in Atlanta: What to Know First

Rheem AC installation in Atlanta typically runs $3,500 to $7,500 for a complete system, depending on the model line, your home’s square footage, and whether ductwork needs modifying. Most Rheem installs we schedule take one full day, with the old equipment hauled off and the new system running before we leave. Call (478) 223-8776 for a written, no-commitment quote, and we’ll have a technician at your door inside the window we give you.

Call (478) 223-8776

This page is for Atlanta homeowners who already own a Rheem system, or are leaning Rheem and want straight answers from a team that has installed and serviced Rheem equipment across the metro for years. We’re an independent Rheem service provider, not a factory-authorized dealer. That matters because we can recommend what’s actually right for your house, not what a manufacturer’s program pushes this quarter. Victor Mancini, our owner and lead technician, has worked on Rheem equipment in Atlanta homes from Grant Park bungalows to newer Westside builds, and he’ll tell you what holds up and what doesn’t.

Key Takeaways

• Rheem AC installation in Atlanta costs $3,500 – $7,500, with a written price before any work begins.
• Most Rheem installs take one day, and we handle the haul-off, permits, and startup test.
• We’re an independent Rheem service provider, so our recommendations aren’t tied to a manufacturer program.
• Every installation is backed by our 365-Day Done Right Promise, in writing.
• A live person answers our phone 24/7, including weekends and holidays.

How Rheem Products Fail – and How We Fix Them

Rheem makes a solid product. But we get called out to Atlanta homes every week because a Rheem system quit, and the failure patterns are consistent. Here are the ones we see most often, by model line, and what we do about each.

• Rheem Classic Series (RA13/RA14): These single-stage units are workhorses, but their contactor points burn out after years of Georgia heat. The symptom is an outdoor unit that hums but never spins up. We replace the contactor with an OEM-grade part, test the compressor amp draw, and confirm the whole thing starts clean before we call it done. Sometimes this is the moment a homeowner asks, “Should I just replace the whole system?” Sometimes yes, if the equipment is 15 years old and leaked refrigerant. We’ll give you the honest answer.
• Rheem Prestige Series (RA17/RA20): The communicating systems, the ones with the fancy thermostats. Their failure mode is often a communication error between the outdoor unit and the thermostat, not a mechanical failure at all. We check the low-voltage wiring and the control board before anyone opens a refrigerant line. Half the time it’s a wiring issue, not an equipment issue, and fixing it costs a fraction of a full replacement.
• Rheem Endeavor Line (RA15/RA16): The evaporator coils on these units are prone to formicary corrosion, especially in Atlanta’s humidity and with certain air quality conditions. You’ll see it as a slow refrigerant leak that makes the system lose cooling over a season, not all at once. When the coil fails, we walk you through repair versus replace with hard numbers, not pressure.
• Rheem heat pumps (RP14/RP15/RP17): In Atlanta winters, the reversing valve sticks on older units. The system will heat when it should cool or vice versa. Not always a valve failure, sometimes just a solenoid issue. We diagnose it properly, and if the valve is done, we discuss the math of a new heat pump against putting parts into an aging one.
• Older Rheem units from 2008 – 2012: These came with R-22 refrigerant, which is now heavily phased out and expensive per pound. If an older Rheem needs a refrigerant charge, it’s cheaper to plan a replacement than chase leaks in a system that’s already past its useful life. We’ll give you the price for each path so you can make a decision with open eyes.

Our Rheem AC Installation Process

Here’s what a Rheem AC installation with us actually looks like, from the first call to the last sweep of the driveway.

1. 1
   Call and conversation. You call (478) 223-8776. A live person answers, asks what the system is doing, and schedules a visit inside a firm window. No call centers, no voicemail tag.
2. 2
   Site walk and load check. We measure the house, look at the existing ductwork and insulation, noting what’s in the attic and what condition it’s in, and confirm which Rheem model line you have or what you’d replace it with. We’re not guessing at square footage.
3. 3
   Written price before you choose. We hand over a written proposal with the model, the work scope, the price, and the timeline. That price doesn’t change at the door. This is how we operate, every job, no exceptions.
4. 4
   Install day. Our techs show up in the window we gave you, in uniform, background-checked. We remove the old equipment, put in the new Rheem system, and handle the refrigerant, electrical hookups, and any duct transitions that need to be made. We don’t cut corners on airflow.
5. 5
   Startup and test. We fire the system, check airflow, check refrigerant pressures, and make sure the thermostat is talking to the equipment. You get a plain-English rundown of what we did and why.
6. 6
   Cleanup and the guarantee. We leave the site cleaner than we found it, take the old equipment with us, and hand you the written 365-Day Done Right Promise before we drive off. If anything fails inside a year, we come back and fix it at no charge.

What Rheem AC Installation Costs in Atlanta

Here are the real numbers for Atlanta, not national averages pulled off a spreadsheet.

• Rheem Classic Series AC (13 – 14 SEER2), 2 – 3 ton: $3,500 – $4,800 installed.
• Rheem Endeavor Line AC (15 – 16 SEER2), 2 – 4 ton: $4,200 – $5,800 installed.
• Rheem Prestige Series AC (17 – 20 SEER2), 3 – 5 ton: $5,500 – $7,500 installed, depending on whether it’s a communicating system and what control updates the house needs.
• Rheem heat pump installs: $4,000 – $7,000, depending on line and sizing.

The price moves based on system size, the efficiency level, whether we’re swapping like-for-like or changing lines, and what shape your ductwork is in. Atlanta summers are unforgiving, and undersized equipment fails early. We size by load, not by what was there before. Call (478) 223-8776 for a free estimate with a written number before you decide anything.

Why Atlanta Homeowners Call Cold Harbour Heating and Air Atlanta for Rheem Work

Plenty of companies in Atlanta will put in a Rheem. What they won’t all do is hand you a written price before work starts, show up in the window they promised, and guarantee the work in writing for a full year. We do, every time. That’s not a slogan. It’s how we’ve worked since Victor Mancini started with the Kingswell network in 2003, back when he was still applying what he learned at Los Angeles Trade-Technical College to some of the hottest attics he’d ever been in.

If you have a Rheem now and it’s acting up, we’ll figure out exactly why before we touch a part. Victor’s whole approach is diagnostic: tell him what it’s doing, and he’ll tell you what it needs, no guesswork, no extras. And if Rheem isn’t the right fit for your next system, we work on Carrier, Trane, and Lennox too, so the recommendation you get is the one that suits your house and budget, not the brand we happen to have in stock.

FAQs